From: Simon Glass <sjg@chromium.org> This is needed for virtio-fs since it makes use of the same structures. Add a version from Linux v6.15 Signed-off-by: Simon Glass <sjg@chromium.org> --- MAINTAINERS | 1 + include/linux/fuse.h | 1289 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1290 insertions(+) create mode 100644 include/linux/fuse.h diff --git a/MAINTAINERS b/MAINTAINERS index e5389aeae45..566b577274e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1203,6 +1203,7 @@ F: include/file.h F: include/fpga.h F: include/fs.h F: include/iovec.h +F: include/linux/fuse.h F: test/dm/fpga.c FLATTENED DEVICE TREE diff --git a/include/linux/fuse.h b/include/linux/fuse.h new file mode 100644 index 00000000000..5ec43ecbceb --- /dev/null +++ b/include/linux/fuse.h @@ -0,0 +1,1289 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */ +/* + This file defines the kernel interface of FUSE + Copyright (C) 2001-2008 Miklos Szeredi <miklos@szeredi.hu> + + This program can be distributed under the terms of the GNU GPL. + See the file COPYING. + + This -- and only this -- header file may also be distributed under + the terms of the BSD Licence as follows: + + Copyright (C) 2001-2007 Miklos Szeredi. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND + ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE + FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. +*/ + +/* + * This file defines the kernel interface of FUSE + * + * Protocol changelog: + * + * 7.1: + * - add the following messages: + * FUSE_SETATTR, FUSE_SYMLINK, FUSE_MKNOD, FUSE_MKDIR, FUSE_UNLINK, + * FUSE_RMDIR, FUSE_RENAME, FUSE_LINK, FUSE_OPEN, FUSE_READ, FUSE_WRITE, + * FUSE_RELEASE, FUSE_FSYNC, FUSE_FLUSH, FUSE_SETXATTR, FUSE_GETXATTR, + * FUSE_LISTXATTR, FUSE_REMOVEXATTR, FUSE_OPENDIR, FUSE_READDIR, + * FUSE_RELEASEDIR + * - add padding to messages to accommodate 32-bit servers on 64-bit kernels + * + * 7.2: + * - add FOPEN_DIRECT_IO and FOPEN_KEEP_CACHE flags + * - add FUSE_FSYNCDIR message + * + * 7.3: + * - add FUSE_ACCESS message + * - add FUSE_CREATE message + * - add filehandle to fuse_setattr_in + * + * 7.4: + * - add frsize to fuse_kstatfs + * - clean up request size limit checking + * + * 7.5: + * - add flags and max_write to fuse_init_out + * + * 7.6: + * - add max_readahead to fuse_init_in and fuse_init_out + * + * 7.7: + * - add FUSE_INTERRUPT message + * - add POSIX file lock support + * + * 7.8: + * - add lock_owner and flags fields to fuse_release_in + * - add FUSE_BMAP message + * - add FUSE_DESTROY message + * + * 7.9: + * - new fuse_getattr_in input argument of GETATTR + * - add lk_flags in fuse_lk_in + * - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in + * - add blksize field to fuse_attr + * - add file flags field to fuse_read_in and fuse_write_in + * - Add ATIME_NOW and MTIME_NOW flags to fuse_setattr_in + * + * 7.10 + * - add nonseekable open flag + * + * 7.11 + * - add IOCTL message + * - add unsolicited notification support + * - add POLL message and NOTIFY_POLL notification + * + * 7.12 + * - add umask flag to input argument of create, mknod and mkdir + * - add notification messages for invalidation of inodes and + * directory entries + * + * 7.13 + * - make max number of background requests and congestion threshold + * tunables + * + * 7.14 + * - add splice support to fuse device + * + * 7.15 + * - add store notify + * - add retrieve notify + * + * 7.16 + * - add BATCH_FORGET request + * - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct + * fuse_ioctl_iovec' instead of ambiguous 'struct iovec' + * - add FUSE_IOCTL_32BIT flag + * + * 7.17 + * - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK + * + * 7.18 + * - add FUSE_IOCTL_DIR flag + * - add FUSE_NOTIFY_DELETE + * + * 7.19 + * - add FUSE_FALLOCATE + * + * 7.20 + * - add FUSE_AUTO_INVAL_DATA + * + * 7.21 + * - add FUSE_READDIRPLUS + * - send the requested events in POLL request + * + * 7.22 + * - add FUSE_ASYNC_DIO + * + * 7.23 + * - add FUSE_WRITEBACK_CACHE + * - add time_gran to fuse_init_out + * - add reserved space to fuse_init_out + * - add FATTR_CTIME + * - add ctime and ctimensec to fuse_setattr_in + * - add FUSE_RENAME2 request + * - add FUSE_NO_OPEN_SUPPORT flag + * + * 7.24 + * - add FUSE_LSEEK for SEEK_HOLE and SEEK_DATA support + * + * 7.25 + * - add FUSE_PARALLEL_DIROPS + * + * 7.26 + * - add FUSE_HANDLE_KILLPRIV + * - add FUSE_POSIX_ACL + * + * 7.27 + * - add FUSE_ABORT_ERROR + * + * 7.28 + * - add FUSE_COPY_FILE_RANGE + * - add FOPEN_CACHE_DIR + * - add FUSE_MAX_PAGES, add max_pages to init_out + * - add FUSE_CACHE_SYMLINKS + * + * 7.29 + * - add FUSE_NO_OPENDIR_SUPPORT flag + * + * 7.30 + * - add FUSE_EXPLICIT_INVAL_DATA + * - add FUSE_IOCTL_COMPAT_X32 + * + * 7.31 + * - add FUSE_WRITE_KILL_PRIV flag + * - add FUSE_SETUPMAPPING and FUSE_REMOVEMAPPING + * - add map_alignment to fuse_init_out, add FUSE_MAP_ALIGNMENT flag + * + * 7.32 + * - add flags to fuse_attr, add FUSE_ATTR_SUBMOUNT, add FUSE_SUBMOUNTS + * + * 7.33 + * - add FUSE_HANDLE_KILLPRIV_V2, FUSE_WRITE_KILL_SUIDGID, FATTR_KILL_SUIDGID + * - add FUSE_OPEN_KILL_SUIDGID + * - extend fuse_setxattr_in, add FUSE_SETXATTR_EXT + * - add FUSE_SETXATTR_ACL_KILL_SGID + * + * 7.34 + * - add FUSE_SYNCFS + * + * 7.35 + * - add FOPEN_NOFLUSH + * + * 7.36 + * - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag + * - add flags2 to fuse_init_in and fuse_init_out + * - add FUSE_SECURITY_CTX init flag + * - add security context to create, mkdir, symlink, and mknod requests + * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX + * + * 7.37 + * - add FUSE_TMPFILE + * + * 7.38 + * - add FUSE_EXPIRE_ONLY flag to fuse_notify_inval_entry + * - add FOPEN_PARALLEL_DIRECT_WRITES + * - add total_extlen to fuse_in_header + * - add FUSE_MAX_NR_SECCTX + * - add extension header + * - add FUSE_EXT_GROUPS + * - add FUSE_CREATE_SUPP_GROUP + * - add FUSE_HAS_EXPIRE_ONLY + * + * 7.39 + * - add FUSE_DIRECT_IO_ALLOW_MMAP + * - add FUSE_STATX and related structures + * + * 7.40 + * - add max_stack_depth to fuse_init_out, add FUSE_PASSTHROUGH init flag + * - add backing_id to fuse_open_out, add FOPEN_PASSTHROUGH open flag + * - add FUSE_NO_EXPORT_SUPPORT init flag + * - add FUSE_NOTIFY_RESEND, add FUSE_HAS_RESEND init flag + * + * 7.41 + * - add FUSE_ALLOW_IDMAP + * 7.42 + * - Add FUSE_OVER_IO_URING and all other io-uring related flags and data + * structures: + * - struct fuse_uring_ent_in_out + * - struct fuse_uring_req_header + * - struct fuse_uring_cmd_req + * - FUSE_URING_IN_OUT_HEADER_SZ + * - FUSE_URING_OP_IN_OUT_SZ + * - enum fuse_uring_cmd + * + * 7.43 + * - add FUSE_REQUEST_TIMEOUT + */ + +#ifndef _LINUX_FUSE_H +#define _LINUX_FUSE_H + +#ifdef __KERNEL__ +#include <linux/types.h> +#else +#include <stdint.h> +#endif + +/* + * Version negotiation: + * + * Both the kernel and userspace send the version they support in the + * INIT request and reply respectively. + * + * If the major versions match then both shall use the smallest + * of the two minor versions for communication. + * + * If the kernel supports a larger major version, then userspace shall + * reply with the major version it supports, ignore the rest of the + * INIT message and expect a new INIT message from the kernel with a + * matching major version. + * + * If the library supports a larger major version, then it shall fall + * back to the major protocol version sent by the kernel for + * communication and reply with that major version (and an arbitrary + * supported minor version). + */ + +/** Version number of this interface */ +#define FUSE_KERNEL_VERSION 7 + +/** Minor version number of this interface */ +#define FUSE_KERNEL_MINOR_VERSION 43 + +/** The node ID of the root inode */ +#define FUSE_ROOT_ID 1 + +/* Make sure all structures are padded to 64bit boundary, so 32bit + userspace works under 64bit kernels */ + +struct fuse_attr { + uint64_t ino; + uint64_t size; + uint64_t blocks; + uint64_t atime; + uint64_t mtime; + uint64_t ctime; + uint32_t atimensec; + uint32_t mtimensec; + uint32_t ctimensec; + uint32_t mode; + uint32_t nlink; + uint32_t uid; + uint32_t gid; + uint32_t rdev; + uint32_t blksize; + uint32_t flags; +}; + +/* + * The following structures are bit-for-bit compatible with the statx(2) ABI in + * Linux. + */ +struct fuse_sx_time { + int64_t tv_sec; + uint32_t tv_nsec; + int32_t __reserved; +}; + +struct fuse_statx { + uint32_t mask; + uint32_t blksize; + uint64_t attributes; + uint32_t nlink; + uint32_t uid; + uint32_t gid; + uint16_t mode; + uint16_t __spare0[1]; + uint64_t ino; + uint64_t size; + uint64_t blocks; + uint64_t attributes_mask; + struct fuse_sx_time atime; + struct fuse_sx_time btime; + struct fuse_sx_time ctime; + struct fuse_sx_time mtime; + uint32_t rdev_major; + uint32_t rdev_minor; + uint32_t dev_major; + uint32_t dev_minor; + uint64_t __spare2[14]; +}; + +struct fuse_kstatfs { + uint64_t blocks; + uint64_t bfree; + uint64_t bavail; + uint64_t files; + uint64_t ffree; + uint32_t bsize; + uint32_t namelen; + uint32_t frsize; + uint32_t padding; + uint32_t spare[6]; +}; + +struct fuse_file_lock { + uint64_t start; + uint64_t end; + uint32_t type; + uint32_t pid; /* tgid */ +}; + +/** + * Bitmasks for fuse_setattr_in.valid + */ +#define FATTR_MODE (1 << 0) +#define FATTR_UID (1 << 1) +#define FATTR_GID (1 << 2) +#define FATTR_SIZE (1 << 3) +#define FATTR_ATIME (1 << 4) +#define FATTR_MTIME (1 << 5) +#define FATTR_FH (1 << 6) +#define FATTR_ATIME_NOW (1 << 7) +#define FATTR_MTIME_NOW (1 << 8) +#define FATTR_LOCKOWNER (1 << 9) +#define FATTR_CTIME (1 << 10) +#define FATTR_KILL_SUIDGID (1 << 11) + +/** + * Flags returned by the OPEN request + * + * FOPEN_DIRECT_IO: bypass page cache for this open file + * FOPEN_KEEP_CACHE: don't invalidate the data cache on open + * FOPEN_NONSEEKABLE: the file is not seekable + * FOPEN_CACHE_DIR: allow caching this directory + * FOPEN_STREAM: the file is stream-like (no file position at all) + * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE) + * FOPEN_PARALLEL_DIRECT_WRITES: Allow concurrent direct writes on the same inode + * FOPEN_PASSTHROUGH: passthrough read/write io for this open file + */ +#define FOPEN_DIRECT_IO (1 << 0) +#define FOPEN_KEEP_CACHE (1 << 1) +#define FOPEN_NONSEEKABLE (1 << 2) +#define FOPEN_CACHE_DIR (1 << 3) +#define FOPEN_STREAM (1 << 4) +#define FOPEN_NOFLUSH (1 << 5) +#define FOPEN_PARALLEL_DIRECT_WRITES (1 << 6) +#define FOPEN_PASSTHROUGH (1 << 7) + +/** + * INIT request/reply flags + * + * FUSE_ASYNC_READ: asynchronous read requests + * FUSE_POSIX_LOCKS: remote locking for POSIX file locks + * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported) + * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem + * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." + * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB + * FUSE_DONT_MASK: don't apply umask to file mode on create operations + * FUSE_SPLICE_WRITE: kernel supports splice write on the device + * FUSE_SPLICE_MOVE: kernel supports splice move on the device + * FUSE_SPLICE_READ: kernel supports splice read on the device + * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks + * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories + * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages + * FUSE_DO_READDIRPLUS: do READDIRPLUS (READDIR+LOOKUP in one) + * FUSE_READDIRPLUS_AUTO: adaptive readdirplus + * FUSE_ASYNC_DIO: asynchronous direct I/O submission + * FUSE_WRITEBACK_CACHE: use writeback cache for buffered writes + * FUSE_NO_OPEN_SUPPORT: kernel supports zero-message opens + * FUSE_PARALLEL_DIROPS: allow parallel lookups and readdir + * FUSE_HANDLE_KILLPRIV: fs handles killing suid/sgid/cap on write/chown/trunc + * FUSE_POSIX_ACL: filesystem supports posix acls + * FUSE_ABORT_ERROR: reading the device after abort returns ECONNABORTED + * FUSE_MAX_PAGES: init_out.max_pages contains the max number of req pages + * FUSE_CACHE_SYMLINKS: cache READLINK responses + * FUSE_NO_OPENDIR_SUPPORT: kernel supports zero-message opendir + * FUSE_EXPLICIT_INVAL_DATA: only invalidate cached pages on explicit request + * FUSE_MAP_ALIGNMENT: init_out.map_alignment contains log2(byte alignment) for + * foffset and moffset fields in struct + * fuse_setupmapping_out and fuse_removemapping_one. + * FUSE_SUBMOUNTS: kernel supports auto-mounting directory submounts + * FUSE_HANDLE_KILLPRIV_V2: fs kills suid/sgid/cap on write/chown/trunc. + * Upon write/truncate suid/sgid is only killed if caller + * does not have CAP_FSETID. Additionally upon + * write/truncate sgid is killed only if file has group + * execute permission. (Same as Linux VFS behavior). + * FUSE_SETXATTR_EXT: Server supports extended struct fuse_setxattr_in + * FUSE_INIT_EXT: extended fuse_init_in request + * FUSE_INIT_RESERVED: reserved, do not use + * FUSE_SECURITY_CTX: add security context to create, mkdir, symlink, and + * mknod + * FUSE_HAS_INODE_DAX: use per inode DAX + * FUSE_CREATE_SUPP_GROUP: add supplementary group info to create, mkdir, + * symlink and mknod (single group that matches parent) + * FUSE_HAS_EXPIRE_ONLY: kernel supports expiry-only entry invalidation + * FUSE_DIRECT_IO_ALLOW_MMAP: allow shared mmap in FOPEN_DIRECT_IO mode. + * FUSE_NO_EXPORT_SUPPORT: explicitly disable export support + * FUSE_HAS_RESEND: kernel supports resending pending requests, and the high bit + * of the request ID indicates resend requests + * FUSE_ALLOW_IDMAP: allow creation of idmapped mounts + * FUSE_OVER_IO_URING: Indicate that client supports io-uring + * FUSE_REQUEST_TIMEOUT: kernel supports timing out requests. + * init_out.request_timeout contains the timeout (in secs) + */ +#define FUSE_ASYNC_READ (1 << 0) +#define FUSE_POSIX_LOCKS (1 << 1) +#define FUSE_FILE_OPS (1 << 2) +#define FUSE_ATOMIC_O_TRUNC (1 << 3) +#define FUSE_EXPORT_SUPPORT (1 << 4) +#define FUSE_BIG_WRITES (1 << 5) +#define FUSE_DONT_MASK (1 << 6) +#define FUSE_SPLICE_WRITE (1 << 7) +#define FUSE_SPLICE_MOVE (1 << 8) +#define FUSE_SPLICE_READ (1 << 9) +#define FUSE_FLOCK_LOCKS (1 << 10) +#define FUSE_HAS_IOCTL_DIR (1 << 11) +#define FUSE_AUTO_INVAL_DATA (1 << 12) +#define FUSE_DO_READDIRPLUS (1 << 13) +#define FUSE_READDIRPLUS_AUTO (1 << 14) +#define FUSE_ASYNC_DIO (1 << 15) +#define FUSE_WRITEBACK_CACHE (1 << 16) +#define FUSE_NO_OPEN_SUPPORT (1 << 17) +#define FUSE_PARALLEL_DIROPS (1 << 18) +#define FUSE_HANDLE_KILLPRIV (1 << 19) +#define FUSE_POSIX_ACL (1 << 20) +#define FUSE_ABORT_ERROR (1 << 21) +#define FUSE_MAX_PAGES (1 << 22) +#define FUSE_CACHE_SYMLINKS (1 << 23) +#define FUSE_NO_OPENDIR_SUPPORT (1 << 24) +#define FUSE_EXPLICIT_INVAL_DATA (1 << 25) +#define FUSE_MAP_ALIGNMENT (1 << 26) +#define FUSE_SUBMOUNTS (1 << 27) +#define FUSE_HANDLE_KILLPRIV_V2 (1 << 28) +#define FUSE_SETXATTR_EXT (1 << 29) +#define FUSE_INIT_EXT (1 << 30) +#define FUSE_INIT_RESERVED (1 << 31) +/* bits 32..63 get shifted down 32 bits into the flags2 field */ +#define FUSE_SECURITY_CTX (1ULL << 32) +#define FUSE_HAS_INODE_DAX (1ULL << 33) +#define FUSE_CREATE_SUPP_GROUP (1ULL << 34) +#define FUSE_HAS_EXPIRE_ONLY (1ULL << 35) +#define FUSE_DIRECT_IO_ALLOW_MMAP (1ULL << 36) +#define FUSE_PASSTHROUGH (1ULL << 37) +#define FUSE_NO_EXPORT_SUPPORT (1ULL << 38) +#define FUSE_HAS_RESEND (1ULL << 39) +/* Obsolete alias for FUSE_DIRECT_IO_ALLOW_MMAP */ +#define FUSE_DIRECT_IO_RELAX FUSE_DIRECT_IO_ALLOW_MMAP +#define FUSE_ALLOW_IDMAP (1ULL << 40) +#define FUSE_OVER_IO_URING (1ULL << 41) +#define FUSE_REQUEST_TIMEOUT (1ULL << 42) + +/** + * CUSE INIT request/reply flags + * + * CUSE_UNRESTRICTED_IOCTL: use unrestricted ioctl + */ +#define CUSE_UNRESTRICTED_IOCTL (1 << 0) + +/** + * Release flags + */ +#define FUSE_RELEASE_FLUSH (1 << 0) +#define FUSE_RELEASE_FLOCK_UNLOCK (1 << 1) + +/** + * Getattr flags + */ +#define FUSE_GETATTR_FH (1 << 0) + +/** + * Lock flags + */ +#define FUSE_LK_FLOCK (1 << 0) + +/** + * WRITE flags + * + * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed + * FUSE_WRITE_LOCKOWNER: lock_owner field is valid + * FUSE_WRITE_KILL_SUIDGID: kill suid and sgid bits + */ +#define FUSE_WRITE_CACHE (1 << 0) +#define FUSE_WRITE_LOCKOWNER (1 << 1) +#define FUSE_WRITE_KILL_SUIDGID (1 << 2) + +/* Obsolete alias; this flag implies killing suid/sgid only. */ +#define FUSE_WRITE_KILL_PRIV FUSE_WRITE_KILL_SUIDGID + +/** + * Read flags + */ +#define FUSE_READ_LOCKOWNER (1 << 1) + +/** + * Ioctl flags + * + * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine + * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed + * FUSE_IOCTL_RETRY: retry with new iovecs + * FUSE_IOCTL_32BIT: 32bit ioctl + * FUSE_IOCTL_DIR: is a directory + * FUSE_IOCTL_COMPAT_X32: x32 compat ioctl on 64bit machine (64bit time_t) + * + * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs + */ +#define FUSE_IOCTL_COMPAT (1 << 0) +#define FUSE_IOCTL_UNRESTRICTED (1 << 1) +#define FUSE_IOCTL_RETRY (1 << 2) +#define FUSE_IOCTL_32BIT (1 << 3) +#define FUSE_IOCTL_DIR (1 << 4) +#define FUSE_IOCTL_COMPAT_X32 (1 << 5) + +#define FUSE_IOCTL_MAX_IOV 256 + +/** + * Poll flags + * + * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify + */ +#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0) + +/** + * Fsync flags + * + * FUSE_FSYNC_FDATASYNC: Sync data only, not metadata + */ +#define FUSE_FSYNC_FDATASYNC (1 << 0) + +/** + * fuse_attr flags + * + * FUSE_ATTR_SUBMOUNT: Object is a submount root + * FUSE_ATTR_DAX: Enable DAX for this file in per inode DAX mode + */ +#define FUSE_ATTR_SUBMOUNT (1 << 0) +#define FUSE_ATTR_DAX (1 << 1) + +/** + * Open flags + * FUSE_OPEN_KILL_SUIDGID: Kill suid and sgid if executable + */ +#define FUSE_OPEN_KILL_SUIDGID (1 << 0) + +/** + * setxattr flags + * FUSE_SETXATTR_ACL_KILL_SGID: Clear SGID when system.posix_acl_access is set + */ +#define FUSE_SETXATTR_ACL_KILL_SGID (1 << 0) + +/** + * notify_inval_entry flags + * FUSE_EXPIRE_ONLY + */ +#define FUSE_EXPIRE_ONLY (1 << 0) + +/** + * extension type + * FUSE_MAX_NR_SECCTX: maximum value of &fuse_secctx_header.nr_secctx + * FUSE_EXT_GROUPS: &fuse_supp_groups extension + */ +enum fuse_ext_type { + /* Types 0..31 are reserved for fuse_secctx_header */ + FUSE_MAX_NR_SECCTX = 31, + FUSE_EXT_GROUPS = 32, +}; + +enum fuse_opcode { + FUSE_LOOKUP = 1, + FUSE_FORGET = 2, /* no reply */ + FUSE_GETATTR = 3, + FUSE_SETATTR = 4, + FUSE_READLINK = 5, + FUSE_SYMLINK = 6, + FUSE_MKNOD = 8, + FUSE_MKDIR = 9, + FUSE_UNLINK = 10, + FUSE_RMDIR = 11, + FUSE_RENAME = 12, + FUSE_LINK = 13, + FUSE_OPEN = 14, + FUSE_READ = 15, + FUSE_WRITE = 16, + FUSE_STATFS = 17, + FUSE_RELEASE = 18, + FUSE_FSYNC = 20, + FUSE_SETXATTR = 21, + FUSE_GETXATTR = 22, + FUSE_LISTXATTR = 23, + FUSE_REMOVEXATTR = 24, + FUSE_FLUSH = 25, + FUSE_INIT = 26, + FUSE_OPENDIR = 27, + FUSE_READDIR = 28, + FUSE_RELEASEDIR = 29, + FUSE_FSYNCDIR = 30, + FUSE_GETLK = 31, + FUSE_SETLK = 32, + FUSE_SETLKW = 33, + FUSE_ACCESS = 34, + FUSE_CREATE = 35, + FUSE_INTERRUPT = 36, + FUSE_BMAP = 37, + FUSE_DESTROY = 38, + FUSE_IOCTL = 39, + FUSE_POLL = 40, + FUSE_NOTIFY_REPLY = 41, + FUSE_BATCH_FORGET = 42, + FUSE_FALLOCATE = 43, + FUSE_READDIRPLUS = 44, + FUSE_RENAME2 = 45, + FUSE_LSEEK = 46, + FUSE_COPY_FILE_RANGE = 47, + FUSE_SETUPMAPPING = 48, + FUSE_REMOVEMAPPING = 49, + FUSE_SYNCFS = 50, + FUSE_TMPFILE = 51, + FUSE_STATX = 52, + + /* CUSE specific operations */ + CUSE_INIT = 4096, + + /* Reserved opcodes: helpful to detect structure endian-ness */ + CUSE_INIT_BSWAP_RESERVED = 1048576, /* CUSE_INIT << 8 */ + FUSE_INIT_BSWAP_RESERVED = 436207616, /* FUSE_INIT << 24 */ +}; + +enum fuse_notify_code { + FUSE_NOTIFY_POLL = 1, + FUSE_NOTIFY_INVAL_INODE = 2, + FUSE_NOTIFY_INVAL_ENTRY = 3, + FUSE_NOTIFY_STORE = 4, + FUSE_NOTIFY_RETRIEVE = 5, + FUSE_NOTIFY_DELETE = 6, + FUSE_NOTIFY_RESEND = 7, + FUSE_NOTIFY_CODE_MAX, +}; + +/* The read buffer is required to be at least 8k, but may be much larger */ +#define FUSE_MIN_READ_BUFFER 8192 + +#define FUSE_COMPAT_ENTRY_OUT_SIZE 120 + +struct fuse_entry_out { + uint64_t nodeid; /* Inode ID */ + uint64_t generation; /* Inode generation: nodeid:gen must + be unique for the fs's lifetime */ + uint64_t entry_valid; /* Cache timeout for the name */ + uint64_t attr_valid; /* Cache timeout for the attributes */ + uint32_t entry_valid_nsec; + uint32_t attr_valid_nsec; + struct fuse_attr attr; +}; + +struct fuse_forget_in { + uint64_t nlookup; +}; + +struct fuse_forget_one { + uint64_t nodeid; + uint64_t nlookup; +}; + +struct fuse_batch_forget_in { + uint32_t count; + uint32_t dummy; +}; + +struct fuse_getattr_in { + uint32_t getattr_flags; + uint32_t dummy; + uint64_t fh; +}; + +#define FUSE_COMPAT_ATTR_OUT_SIZE 96 + +struct fuse_attr_out { + uint64_t attr_valid; /* Cache timeout for the attributes */ + uint32_t attr_valid_nsec; + uint32_t dummy; + struct fuse_attr attr; +}; + +struct fuse_statx_in { + uint32_t getattr_flags; + uint32_t reserved; + uint64_t fh; + uint32_t sx_flags; + uint32_t sx_mask; +}; + +struct fuse_statx_out { + uint64_t attr_valid; /* Cache timeout for the attributes */ + uint32_t attr_valid_nsec; + uint32_t flags; + uint64_t spare[2]; + struct fuse_statx stat; +}; + +#define FUSE_COMPAT_MKNOD_IN_SIZE 8 + +struct fuse_mknod_in { + uint32_t mode; + uint32_t rdev; + uint32_t umask; + uint32_t padding; +}; + +struct fuse_mkdir_in { + uint32_t mode; + uint32_t umask; +}; + +struct fuse_rename_in { + uint64_t newdir; +}; + +struct fuse_rename2_in { + uint64_t newdir; + uint32_t flags; + uint32_t padding; +}; + +struct fuse_link_in { + uint64_t oldnodeid; +}; + +struct fuse_setattr_in { + uint32_t valid; + uint32_t padding; + uint64_t fh; + uint64_t size; + uint64_t lock_owner; + uint64_t atime; + uint64_t mtime; + uint64_t ctime; + uint32_t atimensec; + uint32_t mtimensec; + uint32_t ctimensec; + uint32_t mode; + uint32_t unused4; + uint32_t uid; + uint32_t gid; + uint32_t unused5; +}; + +struct fuse_open_in { + uint32_t flags; + uint32_t open_flags; /* FUSE_OPEN_... */ +}; + +struct fuse_create_in { + uint32_t flags; + uint32_t mode; + uint32_t umask; + uint32_t open_flags; /* FUSE_OPEN_... */ +}; + +struct fuse_open_out { + uint64_t fh; + uint32_t open_flags; + int32_t backing_id; +}; + +struct fuse_release_in { + uint64_t fh; + uint32_t flags; + uint32_t release_flags; + uint64_t lock_owner; +}; + +struct fuse_flush_in { + uint64_t fh; + uint32_t unused; + uint32_t padding; + uint64_t lock_owner; +}; + +struct fuse_read_in { + uint64_t fh; + uint64_t offset; + uint32_t size; + uint32_t read_flags; + uint64_t lock_owner; + uint32_t flags; + uint32_t padding; +}; + +#define FUSE_COMPAT_WRITE_IN_SIZE 24 + +struct fuse_write_in { + uint64_t fh; + uint64_t offset; + uint32_t size; + uint32_t write_flags; + uint64_t lock_owner; + uint32_t flags; + uint32_t padding; +}; + +struct fuse_write_out { + uint32_t size; + uint32_t padding; +}; + +#define FUSE_COMPAT_STATFS_SIZE 48 + +struct fuse_statfs_out { + struct fuse_kstatfs st; +}; + +struct fuse_fsync_in { + uint64_t fh; + uint32_t fsync_flags; + uint32_t padding; +}; + +#define FUSE_COMPAT_SETXATTR_IN_SIZE 8 + +struct fuse_setxattr_in { + uint32_t size; + uint32_t flags; + uint32_t setxattr_flags; + uint32_t padding; +}; + +struct fuse_getxattr_in { + uint32_t size; + uint32_t padding; +}; + +struct fuse_getxattr_out { + uint32_t size; + uint32_t padding; +}; + +struct fuse_lk_in { + uint64_t fh; + uint64_t owner; + struct fuse_file_lock lk; + uint32_t lk_flags; + uint32_t padding; +}; + +struct fuse_lk_out { + struct fuse_file_lock lk; +}; + +struct fuse_access_in { + uint32_t mask; + uint32_t padding; +}; + +struct fuse_init_in { + uint32_t major; + uint32_t minor; + uint32_t max_readahead; + uint32_t flags; + uint32_t flags2; + uint32_t unused[11]; +}; + +#define FUSE_COMPAT_INIT_OUT_SIZE 8 +#define FUSE_COMPAT_22_INIT_OUT_SIZE 24 + +struct fuse_init_out { + uint32_t major; + uint32_t minor; + uint32_t max_readahead; + uint32_t flags; + uint16_t max_background; + uint16_t congestion_threshold; + uint32_t max_write; + uint32_t time_gran; + uint16_t max_pages; + uint16_t map_alignment; + uint32_t flags2; + uint32_t max_stack_depth; + uint16_t request_timeout; + uint16_t unused[11]; +}; + +#define CUSE_INIT_INFO_MAX 4096 + +struct cuse_init_in { + uint32_t major; + uint32_t minor; + uint32_t unused; + uint32_t flags; +}; + +struct cuse_init_out { + uint32_t major; + uint32_t minor; + uint32_t unused; + uint32_t flags; + uint32_t max_read; + uint32_t max_write; + uint32_t dev_major; /* chardev major */ + uint32_t dev_minor; /* chardev minor */ + uint32_t spare[10]; +}; + +struct fuse_interrupt_in { + uint64_t unique; +}; + +struct fuse_bmap_in { + uint64_t block; + uint32_t blocksize; + uint32_t padding; +}; + +struct fuse_bmap_out { + uint64_t block; +}; + +struct fuse_ioctl_in { + uint64_t fh; + uint32_t flags; + uint32_t cmd; + uint64_t arg; + uint32_t in_size; + uint32_t out_size; +}; + +struct fuse_ioctl_iovec { + uint64_t base; + uint64_t len; +}; + +struct fuse_ioctl_out { + int32_t result; + uint32_t flags; + uint32_t in_iovs; + uint32_t out_iovs; +}; + +struct fuse_poll_in { + uint64_t fh; + uint64_t kh; + uint32_t flags; + uint32_t events; +}; + +struct fuse_poll_out { + uint32_t revents; + uint32_t padding; +}; + +struct fuse_notify_poll_wakeup_out { + uint64_t kh; +}; + +struct fuse_fallocate_in { + uint64_t fh; + uint64_t offset; + uint64_t length; + uint32_t mode; + uint32_t padding; +}; + +/** + * FUSE request unique ID flag + * + * Indicates whether this is a resend request. The receiver should handle this + * request accordingly. + */ +#define FUSE_UNIQUE_RESEND (1ULL << 63) + +/** + * This value will be set by the kernel to + * (struct fuse_in_header).{uid,gid} fields in + * case when: + * - fuse daemon enabled FUSE_ALLOW_IDMAP + * - idmapping information is not available and uid/gid + * can not be mapped in accordance with an idmapping. + * + * Note: an idmapping information always available + * for inode creation operations like: + * FUSE_MKNOD, FUSE_SYMLINK, FUSE_MKDIR, FUSE_TMPFILE, + * FUSE_CREATE and FUSE_RENAME2 (with RENAME_WHITEOUT). + */ +#define FUSE_INVALID_UIDGID ((uint32_t)(-1)) + +struct fuse_in_header { + uint32_t len; + uint32_t opcode; + uint64_t unique; + uint64_t nodeid; + uint32_t uid; + uint32_t gid; + uint32_t pid; + uint16_t total_extlen; /* length of extensions in 8byte units */ + uint16_t padding; +}; + +struct fuse_out_header { + uint32_t len; + int32_t error; + uint64_t unique; +}; + +struct fuse_dirent { + uint64_t ino; + uint64_t off; + uint32_t namelen; + uint32_t type; + char name[]; +}; + +/* Align variable length records to 64bit boundary */ +#define FUSE_REC_ALIGN(x) \ + (((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1)) + +#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) +#define FUSE_DIRENT_ALIGN(x) FUSE_REC_ALIGN(x) +#define FUSE_DIRENT_SIZE(d) \ + FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) + +struct fuse_direntplus { + struct fuse_entry_out entry_out; + struct fuse_dirent dirent; +}; + +#define FUSE_NAME_OFFSET_DIRENTPLUS \ + offsetof(struct fuse_direntplus, dirent.name) +#define FUSE_DIRENTPLUS_SIZE(d) \ + FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET_DIRENTPLUS + (d)->dirent.namelen) + +struct fuse_notify_inval_inode_out { + uint64_t ino; + int64_t off; + int64_t len; +}; + +struct fuse_notify_inval_entry_out { + uint64_t parent; + uint32_t namelen; + uint32_t flags; +}; + +struct fuse_notify_delete_out { + uint64_t parent; + uint64_t child; + uint32_t namelen; + uint32_t padding; +}; + +struct fuse_notify_store_out { + uint64_t nodeid; + uint64_t offset; + uint32_t size; + uint32_t padding; +}; + +struct fuse_notify_retrieve_out { + uint64_t notify_unique; + uint64_t nodeid; + uint64_t offset; + uint32_t size; + uint32_t padding; +}; + +/* Matches the size of fuse_write_in */ +struct fuse_notify_retrieve_in { + uint64_t dummy1; + uint64_t offset; + uint32_t size; + uint32_t dummy2; + uint64_t dummy3; + uint64_t dummy4; +}; + +struct fuse_backing_map { + int32_t fd; + uint32_t flags; + uint64_t padding; +}; + +/* Device ioctls: */ +#define FUSE_DEV_IOC_MAGIC 229 +#define FUSE_DEV_IOC_CLONE _IOR(FUSE_DEV_IOC_MAGIC, 0, uint32_t) +#define FUSE_DEV_IOC_BACKING_OPEN _IOW(FUSE_DEV_IOC_MAGIC, 1, \ + struct fuse_backing_map) +#define FUSE_DEV_IOC_BACKING_CLOSE _IOW(FUSE_DEV_IOC_MAGIC, 2, uint32_t) + +struct fuse_lseek_in { + uint64_t fh; + uint64_t offset; + uint32_t whence; + uint32_t padding; +}; + +struct fuse_lseek_out { + uint64_t offset; +}; + +struct fuse_copy_file_range_in { + uint64_t fh_in; + uint64_t off_in; + uint64_t nodeid_out; + uint64_t fh_out; + uint64_t off_out; + uint64_t len; + uint64_t flags; +}; + +#define FUSE_SETUPMAPPING_FLAG_WRITE (1ull << 0) +#define FUSE_SETUPMAPPING_FLAG_READ (1ull << 1) +struct fuse_setupmapping_in { + /* An already open handle */ + uint64_t fh; + /* Offset into the file to start the mapping */ + uint64_t foffset; + /* Length of mapping required */ + uint64_t len; + /* Flags, FUSE_SETUPMAPPING_FLAG_* */ + uint64_t flags; + /* Offset in Memory Window */ + uint64_t moffset; +}; + +struct fuse_removemapping_in { + /* number of fuse_removemapping_one follows */ + uint32_t count; +}; + +struct fuse_removemapping_one { + /* Offset into the dax window start the unmapping */ + uint64_t moffset; + /* Length of mapping required */ + uint64_t len; +}; + +#define FUSE_REMOVEMAPPING_MAX_ENTRY \ + (PAGE_SIZE / sizeof(struct fuse_removemapping_one)) + +struct fuse_syncfs_in { + uint64_t padding; +}; + +/* + * For each security context, send fuse_secctx with size of security context + * fuse_secctx will be followed by security context name and this in turn + * will be followed by actual context label. + * fuse_secctx, name, context + */ +struct fuse_secctx { + uint32_t size; + uint32_t padding; +}; + +/* + * Contains the information about how many fuse_secctx structures are being + * sent and what's the total size of all security contexts (including + * size of fuse_secctx_header). + * + */ +struct fuse_secctx_header { + uint32_t size; + uint32_t nr_secctx; +}; + +/** + * struct fuse_ext_header - extension header + * @size: total size of this extension including this header + * @type: type of extension + * + * This is made compatible with fuse_secctx_header by using type values > + * FUSE_MAX_NR_SECCTX + */ +struct fuse_ext_header { + uint32_t size; + uint32_t type; +}; + +/** + * struct fuse_supp_groups - Supplementary group extension + * @nr_groups: number of supplementary groups + * @groups: flexible array of group IDs + */ +struct fuse_supp_groups { + uint32_t nr_groups; + uint32_t groups[]; +}; + +/** + * Size of the ring buffer header + */ +#define FUSE_URING_IN_OUT_HEADER_SZ 128 +#define FUSE_URING_OP_IN_OUT_SZ 128 + +/* Used as part of the fuse_uring_req_header */ +struct fuse_uring_ent_in_out { + uint64_t flags; + + /* + * commit ID to be used in a reply to a ring request (see also + * struct fuse_uring_cmd_req) + */ + uint64_t commit_id; + + /* size of user payload buffer */ + uint32_t payload_sz; + uint32_t padding; + + uint64_t reserved; +}; + +/** + * Header for all fuse-io-uring requests + */ +struct fuse_uring_req_header { + /* struct fuse_in_header / struct fuse_out_header */ + char in_out[FUSE_URING_IN_OUT_HEADER_SZ]; + + /* per op code header */ + char op_in[FUSE_URING_OP_IN_OUT_SZ]; + + struct fuse_uring_ent_in_out ring_ent_in_out; +}; + +/** + * sqe commands to the kernel + */ +enum fuse_uring_cmd { + FUSE_IO_URING_CMD_INVALID = 0, + + /* register the request buffer and fetch a fuse request */ + FUSE_IO_URING_CMD_REGISTER = 1, + + /* commit fuse request result and fetch next request */ + FUSE_IO_URING_CMD_COMMIT_AND_FETCH = 2, +}; + +/** + * In the 80B command area of the SQE. + */ +struct fuse_uring_cmd_req { + uint64_t flags; + + /* entry identifier for commits */ + uint64_t commit_id; + + /* queue the command is for (queue index) */ + uint16_t qid; + uint8_t padding[6]; +}; + +#endif /* _LINUX_FUSE_H */ -- 2.43.0